Fabricated Spindle Spec Sheet

Please Print This Worksheet To Provide Us The Correct Specifications For Your Spindle

A = Kingpin Angle ____________B = Offset________________

C = Spindle Drop __________D = Spindle Length ____________  

E = Steering Arm Length ______________

F = Steering Arm Drop ________________

G = Ackermann Neg. ________H = Ackermann Pos. _________

I = 2.3125"  (2 5/16") Upper And Lower Ball Joints Are The Same (727, 772)

Spindle Snout Type _______________________

Type Of Ball Joint - Upper __________________

Type Of Ball Joint - Lower __________________

Type Of Hubs ______________________________

Rotor Thickness _______________Diameter ______________

Caliper Type - Front ______________ Rear _______________