|
____________________________________________________
Top
Links And Trailing Arms
Brackets
And Mounts
Spring Loaded Top Link
Part No. 22210 - $195.00
Please Specify Spring
Length And Rate
BUY
Tech Tip - Spring loaded top links
work really well
when you are required to run narrow tires on dirt on asphalt by adding
extra rubber biscuits. Click Here To See More
Tips. |
______________________________
Rubber Cushion Top Link
Part No. 22020 - $79.95
Please Specify
Length
BUY
______________________________
Top Link Slider Bar
Works With Torque Arm
With Compression Only
Preloads Chassis And Used To Load Rear Tires Under Braking -
Mount Front
Higher Than Rear
Part No. TB22 -
$59.00
BUY
______________________________
Fabricated
Three Link Trailing Arms
Complete with
Monoballs And Spacers
22" center to center
Need a different length ? Only $25.00 more
|
Part No. 22000 - 22" Length
$125.00
BUY
|
Part No. 22000-1 - Special Length
$150.00
BUY
|
|
Can't Find
What You Need ? Ask Us !!
|
Tech Tip - When you run a lot of
angle in your cushion top link for more forward bite, sometimes you will
get wheel hop while braking into the corner. A cure for this is to
remove the front rubber and install a SCP TB22, the telescopic link. It
should be mounted 10 or more degrees uphill to the front of the car.
This link will control your pinion angle after you remove the rubber
from the front of SCP 22020 top link and stop the wheel hop. Click
Here To See More Tech Tips |
________________________________
|
