______________________________________________________________ Throttle Linkage Kit All The Parts In One Handy Kit Do The Job Right - Save Time and Hassle
Complete with 2 all metal rod ends, aircraft aluminum tube, Holley carb bushing, 2 return springs, bolts and nuts Just bend to clear air cleaner, cut to length Thread one end (if shortened - requires 1/4-28 tap) Heat treated
aluminum alloy will not straighten Part No. 3270 - $29.95 ___________________________________ Throttle Return Spring Kits The red anodized spring bracket
mounts on the top of the manifold (drivers side).
The loop end of the spring is attached to the small holes in the spring
return tab, and the straight end of the spring should be inserted through the
holes in the red anodized spring bracket (after excessive slack is taken out, be
sure to loop end of spring several times) Light weight aluminum bracket,
2 springs,
Short for low air cleaners Part No. 32710 -$21.90 BUY ___________________________________
Long for Regular Air Cleaners Part No. 32715 -$24.90 BUY ___________________________________ Primary Throttle Stop Bracket
Prevents broken throttle arms with a positive stop Lightweight aluminum, will not change in use Part No. 32730 -$32.50 BUY ___________________________________ Can't Find What You Need ? Ask Us !!
|
E
Tech Tip - Throttle
Ratio - On dry slick tracks where throttle action becomes critical, try
lengthening the throttle rod (between the carb and gas pedal) to slow
the throttle action for the driver. 
