______________________________________________________________ Thermo - Tec Insulating Materials
Aluminized Heat Barrier
Made up of woven silica with a flexible aluminized finish. The highly reflective surface of the material is capable of withstanding radiant temperatures in excess of 2000°F. Can be installed using standard rivets with a backup washer or weather strip adhesive or snap straps can be used to hold the blanket in place for manifolds or exhaust systems. Part No. 14001 - 10 sq. feet $79.95 BUY ___________________________________ Exhaust Cool Mat
Use the to battle excessive heat and noise that penetrate the driver compartment through the firewalls and floorboards. It is also perfect for in doors, under hoods, and above transmission housings. Composed of resin bonded silica blanketing insulation sandwiched between a mylar facing on one side and a foil facing on the other. The highly reflective mylar reflects the heat away from surfaces, while the foil side is orientated away from the heat source to conduct any penetrating heat across its surface thus providing the ultimate in heat protection. The silica blanketing is a dual density composite and is the main sound insulator. Easy to trim. Can be applied with the push in fasteners provided or weather strip adhesive. Part No. 14100 - 24" x 48" $26.25 BUY ___________________________________ Starter Heat Shield
In today’s high heat environment, starters take in a lot of damaging heat that destroy the windings of the starter and solenoid. To combat this problem Thermo-Tec created a non - conductive strap on heat shield, with a highly reflective mylar surface. The will reflect over 90% of radiant heat, adding life to the starter and assuring reliable starts. The Starter Heat Shield is a universal kit that fits all starters. Part No. 14150 - 7" x 22" $26.25 BUY ___________________________________
|
