|
______________________________________________________________
Longacre Switch
Panels
|
In any emergency these
aircraft safety style switch covers can shut off the ignition quickly
from any angle with just a quick hit, even with driving gloves
on. They cannot be turned on accidentally - and will NEVER shut
off from vibration.
-
High Capacity
Ignition Switch - 40 amps at 12
volt dc
-
Teflon Toggle
Seal - Keeps out dirt
-
New Silicone
Rubber Switch Covers - won't harden
with age
-
Plugs into
Harness Below - Assembled and Wired - ready to install
Aircraft Style Safety
Switch Covers
Regular or Magneto Ignition
Has one switch with
sequence circuits to ground mag (kill motor) and turn off accessories
(dash lites, etc.), and start button. All pre-wired to save time
and eliminate confusion
|
| Part
No. |
Description |
Price |
Click
To Buy |
| 44601 |
Regular
ignition without pilot light |
$37.95 |
|
| 44611 |
Regular
ignition with pilot light |
$41.95 |
|
| 44661 |
Regular
ignition with accessory switch andpilot lights |
$56.80 |
|
| 44671 |
Regular
ignition with accessory switch - no pilot lights |
$51.50 |
|
________________________________
With Weather Proof
Switch Covers
For Regular And Magneto Ignition
| Non hardening Silicone
Rubber. Some have pilot lights to show when ignition is on.
Has one switch with separate circuits to ground mag (kill motor) and
turn off accessories (dash lights, etc.), and start button. All pre-wired to save time
and eliminate confusion. |
| Part
No. |
Description |
Price |
Click
To Buy |
| 44801 |
Regular ignition
without pilot light |
$32.95 |
|
| 44831 |
Regular ignition
with pilot light |
$37.60 |
|
________________________________
Switch Panel With 2
Wired In Accessory Switches
and Pilot Lights
Use the accessory
switches for dash lights, electric fans,
blowers, brake shutoff
solenoids, etc.
Part No. 44881 - $58.45
BUY
_____________________________________________________
Tech Tip: Most switch problems
are caused by dirt inside the switch body. The front is sealed
but the back of the switch may get dirty or wet. Seal it with a
good silicone sealant. We have never had a switch fail due to
electrical overload. |
________________________________
Can't Find
What You Need ? Ask Us !!
|
