______________________________________________________________

Bolt On Water Neck

Fits Chevy Intake Manifolds

Anodized Aluminum

-16AN fitting for use with steel braid reinforced upper radiator hose

Part No. 63460 - $30.00

___________________________________

Cast Filler Neck

Part No. 34302 - $13.75

___________________________________

Pressure Caps

22 lb. - Standard For Competition

Part No. RC22 - $8.50

___________________________________

 29 LB For Higher Pressure Applications

Part No. RC29 - $15.00

________________________________

When using a mechanical fan, a properly designed shroud must be used. Most mechanical fans are not designed for high RPM use: they can have serious vibration problems, due to air turbulence, when run over 6,500 RPM. This is a turbulence problem, not a balance problem, and will destroy the water pump and components in front of it. The large fans preferred by dirt oval track racers can consume up to 18 horsepower at 6,500 RPM. Do NOT run a mechanical fan that is any larger than required for the application.. Click Here To See More Tips.

Can't Find What You Need ? Ask Us !!