______________________________________________________________

Standard Brake Rotor Mounting Hats

Precision Machined From High Strength, Lightweight Aluminum Alloy 

Available are a wide range of offsets and wheel stud patterns. All are designed to provide maximum weight savings and durability. Many are available unmachined to accommodate custom stud bolt circle applications. Hats are black plated to accelerate heat dissipation and prevent corrosion.

5 on 5 Bolt Pattern

8 Mounting Holes, 7.62" Rotor Bolt Circle
6.69" Clearance I.D.

$76.73

________________________________

5 on 4 1/2, 4 3/4, 5 Bolt Patterns

8 Mounting Holes, 7.62" Rotor Bolt Circle
6.82" Clearance I.D.

$72.90

________________________________

GT Rotor Mounting Hats

Designed to provide maximum performance and stability for the severe braking applications of NASCAR Winston Cup, Busch GN and Craftsman Truck Series. Features include close tolerance machining for a precision fit, beefy wall thickness in critical load areas and threaded hat mounting for increased assembly strength. The “Castled” mounting lugs permit greater air flow through the hat and into the rotor for improved cooling. GT Hats are available in standard offsets, and drilled to accept 5/8” studs on a 5.00” bolt circle. 

Our 12 bolt GT Hats take the “Heat Management” philosophy to a new level. In addition to incorporating all the design requirements of our “GT” line, we have increased the number of mounting lugs to handle greater torque loads, and for some styles added stainless steel insulators to be fitted between the rotor and hat. The result is significant heat reduction in the hat and hub for greater component strength and durability. Available in a wide range of offsets, GT Hats provide superior heat protection for short track and road course applications. Each hat is black plated, laser engraved and impression stamped with a part number and date code for easy identification.

Style A - 5 On 5

8 Mounting Holes, 7.00" Rotor Bolt Circle
6.55" Clearance I.D.

$143.57

________________________________

Style B - 5 On 5

All use a .100" thick insulator which is included in the offset measurement

12 Mounting Holes, 6.75" Rotor Bolt Circle
6.23" Clearance I.D.

$143.57

* Face Thickness - .500", All others are .250"

______________________________

IMCA Spun Steel Rotor Hat

IMCA Legal, 3" Offset, 8 Bolts On 7" Bolt Circle

Rotor Mounting Fits Either 5 On 5 Or 5 On 4 3/4" Bolt Pattern

Part No. SCP6203 - $64.00

______________________________

Coleman Grand National Style Hat

Cast Aluminum

Fits SCP Hubs With 5 On 5 Bolt Pattern With 5/8" Studs

Fits Rotors With 8 x 7 5/8" Bolt Patterns

______________________________

Can't Find What You Need ? Ask Us !!